Fortimus

System type: Fortimus | Host label: MAEA | Host name: FMUS-165D (192.168.1.5) | Serial number: 00165D

Data Stream
The "Disable All" and "Restore default" button will ALSO affect settings of any other sensors
"Copy to Data Record" will apply settings from this page to recording configuration of all of the sensors.
Display Streams
Display On Page
Channels configuration
Channel sampling rateChannel sampling rate configuration column.

Please note that modifying settings in this column requires a system reboot to take effect.		Data transformData transformation configuration column.

Please note that when data transformation is enabled for a channel a system reboot has to be performed to apply the configuration.		SEED name - please use check-box to modify the defaultSEED channel name configuration column.

In order to modify the default channel SEED name please check the check-box.
When SEED channel name modification is enabled location and channel name can be modified. Network and station code settings are available in "Setup" tab.

Please note that any change to the SEED channel name will take effect after system reboot.		RESPonse file - if availableASCII representation of RESPonse file.

Please note that full dataless SEED file is available in "Storage" tab.
Seismic channels
Tap UID: 0x0000
Chain Head: S0Calib
Chain Description: Calibration channel data
Sensitivity: 1 µV/count
Units: µV
0ACCC0
Select transform to be applied to this tap.
Enabling or Disabling transformations requires a reboot.
See Transforms page for transform configuration.
    .
Tap UID: 0x0010
Chain Head: S0SeisZ
Chain Description: Main seismometer Z chain
Part of Triplet: First Seismo Triplet
Sensitivity: 2.4399999e-06 m/s²/count
Units: m/s²
0ACCZ0
Select transform to be applied to this tap.
Enabling or Disabling transformations requires a reboot.
See Transforms page for transform configuration.
    .
Tap UID: 0x0020
Chain Head: S0SeisN
Chain Description: Main seismometer N chain
Part of Triplet: First Seismo Triplet
Sensitivity: 2.4399999e-06 m/s²/count
Units: m/s²
0ACCN0
Select transform to be applied to this tap.
Enabling or Disabling transformations requires a reboot.
See Transforms page for transform configuration.
    .
Tap UID: 0x0030
Chain Head: S0SeisE
Chain Description: Main seismometer E chain
Part of Triplet: First Seismo Triplet
Sensitivity: 2.4399999e-06 m/s²/count
Units: m/s²
0ACCE0
Select transform to be applied to this tap.
Enabling or Disabling transformations requires a reboot.
See Transforms page for transform configuration.
    .
Tap UID: 0x0011
Chain Head: S0SeisZ
Chain Description: Main seismometer Z chain
Part of Triplet: Second Seismo Triplet
Sensitivity: 2.4399999e-06 m/s²/count
Units: m/s²
0ACCZ2
Select transform to be applied to this tap.
Enabling or Disabling transformations requires a reboot.
See Transforms page for transform configuration.
    .
Tap UID: 0x0021
Chain Head: S0SeisN
Chain Description: Main seismometer N chain
Part of Triplet: Second Seismo Triplet
Sensitivity: 2.4399999e-06 m/s²/count
Units: m/s²
0ACCN2
Select transform to be applied to this tap.
Enabling or Disabling transformations requires a reboot.
See Transforms page for transform configuration.
    .
Tap UID: 0x0031
Chain Head: S0SeisE
Chain Description: Main seismometer E chain
Part of Triplet: Second Seismo Triplet
Sensitivity: 2.4399999e-06 m/s²/count
Units: m/s²
0ACCE2
Select transform to be applied to this tap.
Enabling or Disabling transformations requires a reboot.
See Transforms page for transform configuration.
    .
MEMS accelerometer channels
Magnetometer channels
Low latency seismic channels
Low latency MEMS accelerometer channels
Auxiliary channels
Tap UID: 0x0190
Chain Head: S0TemprA
Chain Description: Precision temperature within Minimus SI7013
Sensitivity: 0.001 °C/count
Units: °C
0TMPA0
Select transform to be applied to this tap.
Enabling or Disabling transformations requires a reboot.
See Transforms page for transform configuration.
    .
Tap UID: 0x01E0
Chain Head: S0Voltage
Chain Description: The digitiser input voltage.
Sensitivity: 1 mV/count
Units: mV
0VINP0
Select transform to be applied to this tap.
Enabling or Disabling transformations requires a reboot.
See Transforms page for transform configuration.
    .
Tap UID: 0x0170
Chain Head: S0HumidA
Chain Description: Relative Humidity within Minimus
Sensitivity: 0.001 %/count
Units: %
0HUMA0
Select transform to be applied to this tap.
Enabling or Disabling transformations requires a reboot.
See Transforms page for transform configuration.
    .
Tap UID: 0x01F0
Chain Head: S0Power
Chain Description: The digitiser power usage.
Sensitivity: 1 mW/count
Units: mW
0PINP0
Select transform to be applied to this tap.
Enabling or Disabling transformations requires a reboot.
See Transforms page for transform configuration.
    .

Guralp Systems Limited
Midas House, Calleva Park, Aldermaston, Reading, RG7 8EA, UK
Tel: +44 118 981 9056, Fax: +44 118 981 9943
E-Mail: sales@guralp.com, support@guralp.com